Bulk SMS Campaigns via Your Connected Mobile Gateways

Bulk SMS from your own phones Multi-gateway + Dual SIM ports

Bulk SMS Campaigns via Your Connected Mobile Gateways

BulkPro is the bulk SMS campaign feature built into SMSMobilAPI. Instead of using a third-party SMS provider, BulkPro sends messages directly from your own connected phone(s) through the SMSMobileAPI mobile app — while the dashboard manages campaign setup, contact groups, load balancing, live progress, and reporting.

Wizard-based setup

A clear flow: Name → Campaign → Groups → Mobiles → Göndermek. Every step is saved, so you can resume a draft later.

Multi-gateway load balancing

Select one or multiple connected phones. BulkPro automatically distributes recipients across gateways to share the workload and improve throughput.

Dual-SIM port routing

If your phone has SIM Port 1 and Port 2 enabled, BulkPro can treat each port as an additional sending channel, allowing smarter distribution and higher capacity.

Live progress

Track queued, processing, sent, Vefailed counts in real time with the latest logs displayed during sending.

Detailed reporting

Open the campaign report when finished to review per-recipient status, the device response, message IDs, and error details. Includes a Refresh option to update pending rows.

Works with your contact groups

Select one or multiple contact groups and BulkPro can deduplicate recipients by phone number, preventing duplicates across groups.

Automatic management of connected mobiles (SMS Gateways)

SMSMobileAPI automatically manages the mobile phones connected to your account. If you connect one phone or several phones under the same account, they are automatically recognized and available as SMS Gateway devices — no manual device registration needed.

Auto-detection & device availability

When you log in on a new phone using your SMSMobileAPI credentials, the device appears automatically in your gateway list. SMSMobileAPI also enforces a configurable limit of connected devices per account (available slots are shown in the dashboard).

Live device health & useful controls

The gateway list shows real-time status (last check time), battery level, app version, and a device label (editable). You can also enable opt-out mode per device, update the phone number field, send notifications (supported versions), and disconnect devices when needed.

Dual SIM Port 1 / Port 2 management

If your phone supports SIM 1 and SIM 2, SMSMobileAPI lets you enable Port 1 and/or Port 2 per connected device. BulkPro uses this configuration to route SMS through the correct SIM port.

How BulkPro benefits from this

BulkPro can distribute your bulk campaign across all selected connected devices. If a single phone has both Port 1 and Port 2 enabled, BulkPro can treat it as two sending channels for better load balancing.

Nasıl çalışır

BulkPro orchestrates the campaign from the dashboard, while the SMSMobileAPI mobile app sends SMS from your phone number.
This gives you the convenience of a bulk campaign tool with the control of your own mobile gateways.

Name your send

Create a campaign draft and save your configuration step-by-step.

Pick a marketing message

Choose a saved campaign message and preview the SMS content.

Select contact groups

Use your existing groups, preview contacts, and deduplicate by phone number.

Choose your mobile gateways

Select connected phones. If Port 1 and Port 2 are enabled, each port can act as a sending channel.

Send & monitor

Start sending, follow live progress, and review logs in real time.

✓

Report & reconcile

See per-recipient results, message IDs, and final delivery state. Refresh the report if some rows are still pending.

Best practices & compliance

Bulk sending must be done responsibly. SMSMobileAPI helps you run campaigns with your own gateways,
but you remain responsible for compliance with local rules and carrier policies.

Send only to recipients who explicitly opted in (by default, all contacts are treated as opt-in).
Provide opt-out instructions where required by local regulations.
Configure sending speed and delays from the mobile app Ayarlar to respect carrier limits.
Monitor failed and pending states and investigate errors using the report view.

The secure SMSMobileAPI mobile app connecting a phone to the web dashboard and REST API for SMS and call operations — Encrypted mobile-to-platform connection

Official mobile application

The secure bridge between your phone, dashboard and API.

SMS and call operations pass through the official SMSMobileAPI app installed on your connected phone. The app securely pairs the device with your account, synchronizes authorized events and links the mobile network to the dashboard and REST API.

1Mobile appPairs the phone and its SIM 2Encrypted linkAuthenticates and protects data in transit 3Dashboard & APIControls workflows and activity

Signed releases distributed through the official Google Play and Apple App Store listings
Google and Apple platform review, signing and distribution controls
Secure device pairing, HTTPS transport and authenticated API access
Only the permissions required for the mobile features you enable

Get the official SMSMobileAPI app on Google Play

Download the official SMSMobileAPI app on the Apple App Store

Capabilities depend on the permissions and background access allowed by Android or iOS.